Automatic Headlight Tester

Detailed Product Description
APPLICATION
  It is designed for testing the luminous intensity and the illuminating position (or the optical axis deviation amount) of the high/low beam of vehicle headlight. It is suitable for the vehicle testing station, auto manufacturer and vehicle repair unit to test and adjust the vehicle headlight.

MAIN FEATURES
 Use two special cameras (CCD) to collect signal so that the high beam and low beam can be really reduced its image. The testing data can be given out promptly and accurately.
Use a special image analysis card with high speed to digitize the image.
An embedded industrial control computer with high performance and low power sumption performs the data analysis.
The electronic hard disk built-in the industrial control computer ensures the safety storage of the program and data.
The software data bank embedded in the unit is able to store more than 100000 pieces of testing data. It is convenient for you to check them.
With a super-bright LCD and a touch screen, the fashionable figure can be fully displayed. It is easy and simple for you to operate.
The serial port of the industrial control computer and the network card port allow it to work on-line easy and simple.
With a headlight positioning function of prompt scanning, the accurate positioning is guaranteed.
With a high integrity in one and a modularity of all functions, it is easier and simpler to install, maintain and calibrate it. Perfect functions: The high beam of the headlight is automatically tested, the low beam is automatically tested, the mixing of high/low beam is automatically tested, the headlight is adjusted on line, the prompt calibration can be performed with a complete software.
 

MAIN SPECIFICATIONS
* Power voltage: 220V±10%
* Power frequency: 50Hz±2%
* Ambient temperature: (040)
* Ambient humidity: 40%90%
* Measuring range of luminous intensity: 0cd40000cd
* Vertical deviation from the optical axis:
                                        Up1°30 Down2°30
                                       Left2°30 Right2°30
* Indication error of luminous intensity: ±12% (relative error)
* Deviation error from the optical axis: ±15
* Measuring range of lamp height: 460m 1300mm
* Measuring distance: 1m±10cm
* Length of rail: 4.5m or 3m
* Power consumption: 600W
* RS-232port