Brake Tester, Roller Set

BKR serials roller brake tester are well designed to measure vehicle's braking performance.

During testing, wheel slip rate with rollers is monitoring, so the max. brake forces can be determined automatically. The tester would be auto shut down either when testing finished or vehicle tested run out of the tester.

Ceramic roller face makes the friction more than 0.6 (wet) and avoid the tire damage.

All frame made by high-quality steel and galvanized.

Thanks to up-to-date technology, the outputs include max. Braking forces, decelerations, brake differences, brake curves, wheel round out, etc.

General specification:

Roller diameter              200 mm

Roller spacing               380 mm

Roller surface                Ceramic

Maximum track length    750 mm

Minimum track length     2150 mm

Motor                            4X2.2 kW

Axle load allowed           3,000 kg, 10,000kg

Brake testing speed       2.19 km/h

Brake testing range        0-12,000 N, 0-60,000N

Brake testing accuracy   2% F.S.

Operation temperature     540 C

Operation humidity          <95% (no condense)

Compress air supply        0.6-0.9 MPa

Power supply:                 380V, 50Hz (Other power supply available)